The Autowatch Ghost Immobiliser
Autowatch Ghost is a revolutionary immobiliser that protects your car from thieves. The small weatherproof device is hidden in your vehicle's wiring and is invisible to anyone searching for it.
The device stops key cloning, and ECU swapping by working silently with the vehicles CAN data. It will stop your vehicle from starting unless you press your own unique, selected sequence of factory fitted buttons.
Discreet Design
The Autowatch Ghost immobiliser is discreet and silent, as it does not use radio signals. It is connected directly to the CAN network of your vehicle and uses the buttons on your steering wheel or dashboard to generate a discreet PIN code. This is a cheaper alternative to wheel locks, alarms or trackers. It can stop thieves from copying your key fob to get into the vehicle.
The device is designed to fit neatly and easily into your vehicle's dashboard or center console, and it can be hidden with the use of the cover. It does not require keyfobs or LED indicators to function, which means that thieves cannot detect its presence. This system is also weatherproof and has no exposed wiring, which makes it impervious to attempts to alter or remove it.
After your Ghost immobiliser has been installed after which you will receive an encrypted iPhone application that allows you to control the device. You can deactivate the device to allow your car to be driven for valet or service parking. The Ghost will be activated when you enter the PIN again.
Since the number of vehicles being taken away has increased and the timeframes for replacements have gotten longer, security systems such as the Ghost are becoming more valuable. The Ghost's sleek design is perfect for owners of luxury vehicles who wish to maintain their car's performance and aesthetics while enhancing security. The system is Tassa-certified, endorsed by insurers and offers a strong security against key hacking and key copying. It will even monitor the location of your vehicle and send you an alert if it is moved or starts moving. This makes it a good investment, particularly in this current time when thieves are targeting high-demand vehicles. ghost immobiliser cost of the Autowatch ghost is a must to make sure that you do not cause damage to your vehicle warranty.
CAN Bus Communication
The can bus is a system that transmits data between electronic devices inside your vehicle. It can be used for all sorts of reasons, such as monitoring parking sensor systems and feeding information about proximity from outside to driver assist systems such as warnings of lane departure. It can be used to trigger brake by wire systems, such as active collision avoidance. It is a reliable system that operates at high signaling rates over twisted pair cabling, which offers robust noise immunity and fault tolerance.
The Autowatch Ghost immobiliser is connected to the CAN data network of your vehicle. It protects against key cloning or theft by stopping the engine from starting. It is almost undetectable by scanners because it operates quietly and does not emit radio frequency signals. Once you've programmed the device with a unique code, it is impossible to evade it by replacing the ECU.
It makes use of CAN bus communication which is a reliable method of communication that is resistant to hacking and interference. CAN buses employ balanced differential signals and twisted-pair cabling to make sure that messages are sent simultaneously and that every bit of data is recorded in the same place. This eliminates the need for buffering signals, a common source of transmission delays and errors. The CAN bus also supports error-checking by sending a message to all nodes every time an error occurs.
It's now more crucial than ever to safeguard your vehicle by installing an immobiliser. The Autowatch Ghost is a top product that is TASSA-approved which means that more insurance companies will cover customers who have the device installed in their vehicle.
Installing the Ghost is a complex procedure that must be carried out by a certified installer. After installation, the device is completely concealed and can be activated by pressing a combination of buttons that are pre-set on your steering wheel or dashboard. You can also use the emergency pin code override cards, which you'll receive when you install the device, to disable the immobiliser if you forget your pin.
No Radio Frequency Signals
Like other immobilisers Ghost is not activated by key fobs and has no indicators with LEDs on the vehicle to indicate its whereabouts. Instead, it operates directly on the CAN data circuit in your car and is totally inaudible, meaning that a burglar won't even notice it's there. This makes it hard to detect, and deters thieves from attempting to steal your car.
The Ghost is an advanced immobiliser that guards vehicles against key cloning, hacking, and key theft. It is connected to the engine controller unit via CAN, making it very difficult for thieves to take away or disable. The system is also tamper-proof and activated by entering your personal pin number, which you can change anytime.
This will ensure that if you have to leave your car in the garage, it can still only be driven by you and nobody else can access the vehicle and drive it. This feature is extremely helpful in situations where you need to shop or get a delivery or go to the bank. It is also a great security measure for those looking to break into your car and take your possessions.
One of the main reasons Ghost is such a deterrent is that thieves won't know what to do in order to get your car started. This is because the system does not employ traditional security measures like cutting wires or wheel locks. Instead, it employs a unique system that requires you to enter your PIN in order to allow the vehicle to start.
Additionally in addition, the Ghost can also be programmed to service mode, which stops your vehicle from starting until you enter the PIN code once more. This is great for those who are planning to travel for a prolonged period of time, such as an extended business or holiday trip. When you enter the PIN a second time you can easily reset the device back to its default mode.
These features add up to make the Autowatch Ghost the most effective aftermarket CAN bus immobiliser that is available. It is quiet, subtle and is undetectable by a possible thieves. It protects your car against cloning or hacking, and helps you reduce the cost of insurance. It is a leading product that has been independently verified by TASSA, giving responsible car owners peace of mind and confidence that their prized possession will stay where it belongs, in their driveway.
Easy Installation
The Ghost Immobiliser is a revolutionary next-generation security system that shields vehicles from key hacking and cloning. It connects directly to the vehicle's CAN data network. It utilizes buttons already on the steering wheel and dashboard to generate a PIN code sequence that needs to be entered to begin the engine. This means that your vehicle can only be operated by people have been authorized. It is also Tassa Certified and Insurance Approved and is the ideal solution for modern vehicles that do not come with an immobiliser in the factory.
Installation is simple and can be completed within just a few hours. The first step is to determine which power wire runs from the battery to the Ghost Immobiliser. To prevent short circuits from happening, it is recommended that the power wire is protected with heat shrink tubing. Make sure that the wire is connected to an ignition source or other constant 12V source.
Once you've identified the right connection point, use cable ties to bundle it and secure it. Install a fuse tap to shield the connections from power surges. Then, connect the Ghost immobiliser to a grounding location on the vehicle's chassis.
Once installed, Ghost Immobiliser cannot be detected by thieves as it doesn't emit radio waves and does not need LED indicators. It is also quiet, meaning that criminals won't be able to hear it operating or deactivate it. It is also tamper proof because it requires a unique pin code which can only be entered by the driver.
If you're worried that you'll forget your PIN Code or the button you used to access it becomes inoperative There is an emergency override using the Service/Valet Mode feature. This lets you temporarily disable the Ghost immobiliser for servicing or valet parking.
The Autowatch Ghost immobiliser is easy to use and is an alternative to traditional keyfobs. You can connect your iPhone to the device, and it will recognise the location of your car and provide you with the list of nearby locations. The app can be used to track your car and monitor its location if it is stolen or removed from a specified area. Its simplicity of use and stealth features make it a preferred choice for drivers.