Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN bus. It is discrete It does not include LED indicators or key fobs and is hidden within the wiring of your vehicle.
It also allows users to disable the system temporarily by using Transport Mode to use it when they are renting out their vehicle. This guide will guide you through the steps of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your vehicle from key hacking attacks, cloning and relay attacks. The system is directly connected to your vehicle's ECU and is secured by a unique PIN code of your choice. It's undetectable to thieves using scanners for diagnostics or other modern methods, and is unable to be disabled by cutting circuits.
The system is easy to use, however it's important to have an expert installation to ensure a clean and secure connection with your vehicle's ECU. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. They can also suggest an alarm or tracking system to complete the protection package for your vehicle.
First, the installer needs to disconnect your battery to prevent the possibility of airbag deployment and short circuits. After this is completed, the installer can safely begin work. Hand tools are the most basic to be used for precise connections. A multimeter can be used to verify electrical values. Cable ties and insulation tape are also necessary for securing connections and keeping wiring tidy. In addition, the user's manual provides specific guidance specifically tailored to your Ghost Immobiliser model.
It is important to choose an area for grounding that is free of paint or debris during installation. Installers should also make sure that the immobiliser's wires CAN H and CAN L are connected to the proper ECU ports. The wires can be connected or soldered, depending on the model. To ensure a secure and durable connection it is recommended that you choose a high-quality plug.
After the installation is completed After the installation is complete, the customer can turn on the Transport Mode. This allows mechanics or valet parking to access the vehicle without having to know the pin code. To accomplish this, the user must hit the service button on the dashboard 5 times in a matter of 2 seconds. The system will confirm this by showing 5 indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's an excellent choice for anyone who frequently rents out their cars on platforms such as Turo. Immobilisers can also lower insurance costs since it significantly decreases the risk of theft.
Getting Started
If you are looking for a solution to protect your vehicle from thieves You can't go wrong with an autowatch ghost immobiliser. The device protects your vehicle from being started even the theft or copies the key. This is due to its high-tech technology, which is designed to prevent the engine from running without the correct PIN code is entered.
The device connects to the vehicle's bus network CAN which allows direct communication with the ECU. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your car. This is the most secure way to safeguard your pride and joy. It will ensure that your car's value remains intact should you ever decide to sell it.
Installing Ghost's immobiliser is straightforward however, you must follow the directions to avoid electrical problems and malfunctions in the system. First, you need to locate and determine a constant 12V power source and a good grounding point on the vehicle's chassis. Then, you'll be able to begin connecting the wires to the immobiliser. Use high-quality connectors and soldering methods to create a solid connection. Connect the connections with heat shrink tubing, insulation tape or other materials to avoid electrical short circuits.
Once the wires are connected, you can connect the battery and begin the engine to check whether the immobiliser is functioning. When everything is functioning correctly you can place it in a secure place beneath the dash or anywhere else in the vehicle. Make sure to cover it in a secure manner so that a thief cannot alter it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car thieves. It is invulnerable to hacking and key cloning and is not able to be disabled without the code. It is also simple to use and is able to be put into a service valet mode so that your car will not be activated when you take it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting technological security system, has been designed to deter theft of vehicles. It is directly connected to the car's CAN bus network and communicates with the ECU and ECU, making it virtually undetectable as an addition to your car. The Ghost Immobiliser will not interfere with the factory settings of your vehicle, unlike other aftermarket systems that require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanners. This is due to the fact that it does not transmit and receive radio frequency signals and it utilizes CAN data to communicate with your ECU. It doesn't even require any modifications to your existing key fobs.
Enter your disarm sequence (either two or one button) and turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After this, you can start your vehicle and drive off with peace of mind.
Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking, while protecting the value of your car's pride and joy. If you have to surrender your car to a valet or service provider The Ghost Immobiliser can be temporarily disabled in Transport Mode.
You'll need a constant power source (12V) as well as a grounding point to complete the installation of the Ghost immobiliser. Make sure that both are properly insulated and can be touched. Cable ties are also suggested for bundling and securing the wires. This reduces the possibility of theft by potential thieves. Be sure to verify the location of these points to avoid committing a mistake and mark them with the help of tape or a label. Check all connections for signs they are wearing out. Be sure to ensure that all connections are securely in place and properly protected. Make sure to test your Ghost Immobiliser after the installation is completed. This will make sure that the unit is working properly and that all connections and insulation are safe. If there are any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that integrates seamlessly with your vehicle's ECU to prevent the motor from starting without authorization. Its innovative technology protects your car from key cloning and hacking and other typical tactics thieves employ to steal cars. The Ghost is also able to work in conjunction with existing alarm and tracking systems to provide the ultimate vehicle protection. The Ghost's unparalleled features and subtle design make it a preferred choice for car lovers and security-conscious drivers too.
It is crucial to follow the steps of installation to ensure complete integration of the Ghost Immobiliser. Consult the wiring diagram for the vehicle to assist you in locating and connecting the wires. The next step is to determine the grounding and power sources. Once you have located them, you will be required to mark the points so that they are easily identifiable during installation. In addition, it is essential to use high-quality tools and materials. Basic hand tools will aid in making precise connections. A multimeter will check electrical values, and also ensure security. Cable tie and insulation tape ensure that all connections are neat. Finally, a user manual will provide specific guidance specific to your Ghost model.
It is important to test the system prior to installing it. Enter the PIN code into the system and start the vehicle. This test will verify that the immobiliser works in the way it was intended, preventing unauthorized vehicle start-ups. It is recommended that you perform this step regularly as part of your routine vehicle inspections to ensure that the system is working properly.
After the installation has been completed, you can begin driving your vehicle with confidence. The Ghost will help keep your pride and joy safe from potential thieves, ensuring that nobody can take off with your vehicle without the correct PIN code. The Ghost can also be linked with a tracker that is approved by Thatcham to detect any attempts at tampering or theft, allowing you to locate your vehicle if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those made by most major manufacturers. If you're looking to secure your vehicle with this innovative device, contact Monty's Locksmith today to learn more about our installation and maintenance options. We are a TASSA registered installer, a certificate that guarantees we follow strict standards for installing our products. This guarantees customers as well as insurance companies and law enforcement agencies that installations are performed safely and properly.