Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser for CAN buses. It's discreet, doesn't use LED indications or key fobs and is concealed in the wiring of the vehicle.
The user can also deactivate the system temporarily using Transport Mode when renting out their car. This guide will guide you through the installation of an Ghost immobiliser.
car stolen with ghost immobiliser is a cutting-edge security device that protects your vehicle against hacking, key cloning, and relay attacks. The system links directly to your vehicle's ECU and is protected by a unique PIN code that you can choose. It is not detected by thieves using diagnostic scanners and other modern methods. It cannot be disabled using circuit cuts.
The system is simple to use, but professional installation is recommended to ensure a clean connection to the ECU of your vehicle. Installers approved by Thatcham can assist you with the installation and programing of your Ghost system. They can also recommend a tracking or alarm system to complete the security package for your vehicle.
To avoid an accidental deployment of short circuits or airbags To avoid an accidental deployment of airbags or short circuits, the installer must remove your battery. Once the battery is disconnected, the installer can start working safely. Basic hand tools are helpful to make precise connections, while a multimeter can be used to test electrical values and safety. Cable ties and insulation tape are also essential for protecting connections and keeping wiring neat. In addition, the user's manual offers specific instructions specific to the Ghost Immobiliser model you have.
During the installation process, it's essential to choose a grounding point that's free of paint and debris. Installers must also ensure that the immobiliser's wires, CAN H and CAN L are connected to the appropriate ECU ports. These wires can be plugged in or soldered depending on the model. Using a high-quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the client after the installation is completed. This allows mechanics or valet parking to access the vehicle without knowing the pin code. The user must press the service icon on the dashboard five times over 2 seconds. After this is done, the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA certified and Thatcham approved. It's a great choice for anyone who frequently rents out their vehicles on platforms like Turo. An immobiliser can reduce insurance costs, since it decreases the likelihood of theft.
Getting Started
You can't go far wrong using an autowatch immobiliser for those who want to safeguard your car from theft. The device protects your vehicle from being started even if a criminal steals or copies the key. It is possible because of its advanced technology, which prevents the engine from starting until the correct PIN code is entered.
The device is connected to the vehicle's bus network, CAN, allowing direct communication with the ECU. It uses buttons that are already present on the dashboard and steering wheel to create a unique sequence that only you know which makes it impossible for anyone else to start your car. This is the most secure security system that will safeguard your car's pride and joy and will ensure its value in the event that you decide to sell it in the future.
Installing Ghost's immobiliser is straightforward however, you must follow the instructions to avoid electrical problems and system malfunctions. First, you must locate a power supply of 12V and a solid grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors, and soldering techniques for an effective connection. Also, make sure to cover the connections by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other problems.
After the wires are connected, you can connect the battery and start the engine to determine if the immobiliser is working. After you've confirmed that everything is functioning properly then you can put the immobiliser in a safe position inside the vehicle. Make sure to cover it securely so that a thief cannot get it into a compromising position.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) verified, which means that it complies with the highest standards of security and is a great deterrent to car thieves. It is a superior defense against key cloning, hacking and relay attacks. It isn't able to be disabled unless you know the code. It is simple to use, and it can be set into the service valet setting to ensure that your vehicle won't be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to prevent vehicle theft. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser does not interfere with the factory settings of your car, unlike other aftermarket systems that require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanners. This is due to the fact that it doesn't send and receive radio frequency signals, and it utilizes CAN data to communicate with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
Enter the sequence to disarm (either two or one button) and turn on the ignition of your vehicle to use Ghost Immobiliser. The indicator will flash twice to confirm that you've entered the correct code. After that, you are able to start your car and drive away safely.
Once installed, the Ghost Immobiliser will protect your car from key cloning and hacking, while protecting the value of your pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you need to give your car to service or valet park.
To complete a Ghost Immobiliser installation, you'll need to identify a source of constant power (12V) and a grounding point. Make sure that both are well-insulated and safe to touch. Cable ties are also recommended for bundling and securing the wires. This reduces the risk of theft by thieves. To avoid mistakes, make sure to double-check these points and mark them using a label or tape. Examine every connection for signs that they are wearing out. Make sure that all connections are firmly in place and properly protected. Finally, don't forget to test the Ghost Immobiliser after the installation is complete. This will confirm that the unit functions properly and that all connections and insulation are safe. Make sure to address any issues as soon as they arise.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge vehicle security system that integrates seamlessly into your vehicle's ECU to prevent the engine from starting without authorization. Its cutting-edge technology protects your vehicle from key cloning and hacking and other common methods used by thieves to steal vehicles. The Ghost also works in conjunction with existing alarm and tracking systems to give the best protection for your vehicle. The Ghost's unique features, paired with its discreet design makes it a preferred choice for drivers who love cars and security-conscious drivers.
It is crucial to follow the steps of installation in order to ensure the complete integration of the Ghost Immobiliser. Consult the wiring diagram of your vehicle as it will aid you in locating and connecting the wires. After that, you'll need identify the power source as well as grounding points. Once these are found you'll be required to mark them so that they're easy to identify during the installation process. It's essential to use high-quality materials and tools. Basic hand tools can assist in making connections that are precise and a multimeter can confirm electrical values and guarantee security. Cable ties and insulation tape will keep the connections tidy and neat. A Ghost-specific user's manual is also available.
Before you begin installing it is essential to test the system by entering the PIN code and then starting the vehicle. This step will confirm that the immobiliser functions as intended, preventing unauthorised vehicle starts. It is recommended to complete this step regularly as part of your regular inspections of the vehicle to ensure the system is always functioning correctly.
Once the installation is complete Once the installation is complete, you can drive your vehicle with confidence. The Ghost will safeguard your vehicle from would-be car thieves. It will ensure that no one will drive away with your vehicle without having the correct PIN code. The Ghost can also be used with a tracker that is approved by Thatcham to detect any attempts to tamper with or steal your vehicle and allow you to track your vehicle if it's stolen.
The Ghost can be used on a wide range of vehicles and is compatible with the majority of major brands. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that ensures that we adhere to strict standards for installing our products. This ensures customers, insurance companies, and law enforcement agencies that all installations are carried out safely and correctly.