The Ghost Immobiliser
Immobilisers are a powerful weapon in the fight against vehicle theft. They stop the car from beginning without a key fob, and work well to stop hotwiring and traditional forms of vehicle theft. However, newer methods like key replication and relay theft are becoming more widespread.
To combat these latest trends, the ghost immobiliser works to make your vehicle completely inaccessible. It is silent and stealthy and does not use radio signals, key fobs or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network within your vehicle to stop key cloning and theft. It is an TASSA approved product, and is recognized by insurance companies. It is almost undetectable by thieves and operates in silence. It makes use of buttons on your steering wheel, the centre console and door panels to create a unique pin code that must be entered prior to being able to start your car. You can create up to 20 different sequences to increase security. It's easy to install and doesn't require additional hardware.
To get the most effective outcomes, it is recommended that you choose a reputable CAN-immobiliser installer who specializes in your specific vehicle. Ideally, they'll have a workshop close to you where you can go to get your installation done. There is also an array of tools and equipment that can help you with the installation. They will have basic hand tools, a multimeter, and insulation tape, as well as heat shrink tubing to secure the connections. A user manual will provide specific instructions for the wiring of your vehicle.
Disconnect the battery before beginning the installation to prevent short circuits or airbag deployment. It is important to double-check the location of the CAN H and CAN L wires as an incorrect identification could result in unintentional system integration. It is also a great idea to label or mark the wires. Use a multimeter to confirm that the power source is providing an uninterrupted 12V.
Advanced thieves may employ various methods to evade Ghost Immobilisers, such as blocking or spoofing. These techniques work by amplifying the signal transmitted from your key fob to the electronic control unit in your vehicle. However, with advanced anti-jamming technologies and a constant monitoring you can safeguard your vehicle from these sophisticated attacks.
Security Improved
Ghost immobilisers provide an additional layer of protection to guard your car from theft. It uses a PIN security system that you can enter using buttons on the dashboard or steering wheel, making it harder for thieves to take your vehicle. car stolen with ghost immobiliser is also designed to be hidden inside your vehicle, without lights or other indicators that would warn thieves of its presence. It is directly connected to the ECU of your vehicle via the data bus. This means it is not susceptible to relay attacks or hacking.
It's a fantastic investment for those with high-end automobiles, which are at higher risk of theft due to their price and the popularity of their vehicles. Its advanced features shield your car from key duplicates and ECU swapping. Some ghost immobilisers are also integrated with apps, meaning you can arm and disarm easily. They can also be equipped with an option for service/valet that allows you to temporarily disable them while your vehicle is being repaired or serviced.
Another benefit of a ghost immobiliser is that it does not require any cutting of wire. This is a great feature, especially if you own a brand newer vehicle that does not have any built-in immobiliser technology. Certain systems are capable of integrating with an GPS tracking device, providing additional security for your vehicle. The use of a GPS tracker can also help to reduce the cost of insurance. If you opt to purchase ghost immobilisers ensure that it is TASSA verified and that a professional installer will install it for you.
Compatible with all major brands and models
The Ghost Immobiliser was made to work with all major vehicle models and makes, securing your precious possessions from theft. It makes use of buttons on your steering wheel, the centre console or door panels to generate an individual pin code that must be entered before you can drive your vehicle. The system is tamper proof unbreakable and comes with three-year guarantee. It is also fully accredited by insurance companies, which means that it can help to lower your premiums.
In contrast to standard immobilisers that make use of the key fob of your car to control the car's ignition and ignition, the Ghost system operates by directly connecting to the engine controller unit through the CAN data bus. This means that it is impervious to tampering, and is virtually impossible to remove or disable and cannot be hacked by organised car thief criminal gangs. Additionally, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be paired with an secure iPhone application that allows remote monitoring and management.
You can create a PIN code that is easy for you to remember but mathematically difficult for thieves to determine. The PIN can be customized and changed at any point and you can keep your vehicle secure even if it's parked on the street or in a public parking lot. You can also select valet or service mode when you need someone else to drive your vehicle temporarily for instance, when it's in the garage. This feature is also a great way to prevent your vehicle from being stolen by a scammer mechanic. You can choose a Ghost Call alert to give you additional peace of mind. It will notify you when your car is moving or has been moved.
have a peek at this site is an effective security device that protects your vehicle from common methods of theft such as key cloning, key stealing and relay attacks. It works by connecting to the car's data network CAN and blocking communication with the engine ECU. This makes it impossible for thieves to copy or hack your car, making the installation of this system a good idea for all drivers.
Installed, you'll need to enter a PIN of up to 20 digits long using the buttons on the dashboard and steering wheel to start the vehicle. The system is completely concealed and inaccessible to thieves as it does not emit any radio frequency signals. It can also be set to a user-changeable PIN code, which further adds to its security. The system is designed to stop circuit-cutting, making it almost impossible to tamper.
If you happen to forget your PIN, there are systems that let you communicate with the immobiliser using an app on your smartphone and instantly disarm it. Some even come with the option of a service/valet mode, which allows you to start your car temporarily, like when you need to drop it off for maintenance or valet parking.
The Ghost Immobiliser is also unnoticeable to thieves as it does not transmit any radio signals, a major advantage over other aftermarket vehicle security systems. It is also easy to use and does not require any complicated wiring. You can also use it together with a dash cam to provide additional security. Dash cam Thinkware F70 features clear and sharp 1080p HD footage, Format Free Technology, and parking mode. The system can also be wired for maximum performance and durability.
Installation
If you want to protect your vehicle from theft It is essential to choose the correct immobiliser ghost. This device can stop car thefts by blocking the communication between key fobs as well as the engine controller unit. This device stops thieves from intercepting and cloning the signal to start your vehicle. It can also detect any signs of manipulation and alert the vehicle owner.
The device is easy to install and connects to the existing systems in your vehicle. It does not require any modification to the wiring of your vehicle and can be concealed in a secluded area, like under the dashboard. To ensure that the device has been correctly installed, follow the instructions in the user manual. After installation, it's crucial to test the system. This will confirm that the immobiliser ghost works as intended.
You can purchase an Autowatch Ghost 2 immobiliser from an authorized installer and have it installed in your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to steal or bypass the system. Installation typically takes between 2 and 3 hours.
When installing the Ghost it is recommended to consult the wiring diagram for your vehicle model. This will allow you to locate the CAN High and CAN Low wires required to connect the Ghost to your vehicle's engine. It is also essential to verify the connections to ensure that they are safe and well-insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser during normal operation. It will turn off the ignition of your vehicle if you don't start it using the correct PIN, which you will need to enter yourself. The ghost of the immobiliser can be changed to Service/Valet Mode if you require your vehicle to be cleaned or valet parking.